2
1. Set the Contrast of OSD function to 45 and Adjust Brightness to chroma-7120 Y>390 cd/m
2. Switch the chroma-7120 to RGB-mode (with press ?MODE? button )
3. Switch the MEM. channel to Channel 01 ( with up or down arrow on chroma-7120 )
2
4. The LCD-indicator on chroma-7120 will show x = 283 ? 15, y = 297 ? 15, Y = 400 ? 7 cd/m
5. Adjust the Color(user)Mode: RED on OSD window, until chroma 7120 indicator reached the
value R=100
6. Adjust the Color (user) Mode: GREEN on OSD window, until chroma-7120 indicator reached the
value G=100
7. Adjust the Color (user) Mode: BLUE on OSD window, until chroma-7120 indicator reached the
value B=100
8. Repeat above procedure (Item 5,6,7) until chroma-7120 RGB value meet the tolerance =100?2
9. switch the chroma-7120 to xyY mode With press ?MODE? button
10. Press Color (9300) on OSD window to save the adjustment result
B. Adjust 6500 color-temperature:
2
1. Set the Contrast of OSD function to 45 and Adjust Brightness to chroma-7120 Y>390 cd/m
2. Switch the chroma-7120 to RGB-mode (with press ?MODE? button )
3. Switch the MEM. Channel to Channel 02 (with up or down arrow on chroma-7120 )
2
4. The LCD-indicator on chroma-7120 will show x = 313 ? 15, y = 329 ? 15, Y = 400 ? 7 cd/m
5. Adjust the Color (user) Mode: RED on OSD window, until chroma 7120 indicator reached the value R=100
6. Adjust the Colo (user) Mode: GREEN on OSD window, until chroma-7120 indicator reached the value G=100
7. Adjust the Color (user) Mode: BLUE on OSD window, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure (item 5, 6, 7) until chroma-7120 RGB value meet the tolerance =100 ? 2
9. Switch the chroma-7120 to xyY mode with press ?MODE? button
10. Press Color (6500) on OSD window to save the adjustment result
C. Adjust 9300 color-temperature:
2
1. Set the Contrast of OSD function to 45 and Adjust Brightness to chroma-7120 Y>440 cd/m
2. Switch the chroma-7120 to RGB-mode (with press ?MODE? button)
3. Switch the MEM. Channel to Channel 03 (with up or down arrow on chroma-7120)
2
4. The LCD-indicator on chroma-7120 will show x = 283 ? 15, y = 297 ? 15, Y = 450 ? 7 cd/m
5. Adjust the Color (user) Mode: RED on OSD window, until chroma 7120 indicator reached the value R=100
6. Adjust the Color (user) Mode: GREEN on OSD window, until chroma-7120 indicator reached the value
G=100
7. Adjust the Color (user) Mode: BLUE on OSD window, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure (item 5, 6, 7) until chroma-7120 RGB value meet the tolerance =100 ? 2
9. Switch the chroma-7120 to xyY mode with press ?MODE? button
10. Press Color (9300) on OSD window to save the adjustment result
Turn the POWER-button off to on to quit from factory mode (in USER-mode, the OSD window location was placed at
middle of screen)
20 |